Provision of replacement Crane Gantry Cabs

2. The Service
2.1 The Contractor shall provide the following service to the Client for the duration of the service period:
2.2 Design of x3 replacement gantry crane operator cabs
2.3 Fabrication of x3 cabs once design approved
2.4 Replacement/installation of x3 cabs once fabricated
2.5 Commissioning of x3 cabs once installed.
Cab Specification:-
Construction of 3 mm steel plate.
Internally reinforced with steel profiles and lined with 0.7 mm galvanized, plastisol-coated steel plate on walls and ceiling.
250 mm raised floor for cable routing.
Steel plate floor covered with profiled rubber mat.
Walls and ceiling insulated with 45 mm mineral wool.
All windows made of 6 mm green tint toughened safety glass.
Floor window without tint
Incl. document holder and coat hook
Surface treatment - C3H 180 μm:
Entrance door with full window made of 6mm toughened safety glass, green tint
Additional glass in side and rear made of 6mm toughened glass, green-tinted
Terminal cabinet including door and mounting plate, L x W x H = 400x185x1800mm
Light fixture LED 16.8W, 230V, 50/60Hz
Light and socket
Air-con split system 230V, 50/60Hz
Cooling capacity 3,5 kW / 11942 BTU/h
Heating capacity 4,0 kW / 13648 BTU/h
Operating temperature -20°C til +46°C
Filter box consisting of HEPA dust filter, carbon filter, 2Kw heater and fan blower and 4 meter air hose
Operator seat SCS BL Fabric, complete
Mechanical Suspension
Joystick consoles 150x450mm
Padded arm rests
Vinyl head rest
Turntable, with lock
2 pcs joystick's 4 steps in 4 directions
Push button grab operation
Push button for start and 1 pc. emergency stop
All mechanical mounted only