Posi-Turner: Model numbers – 10LS-250 or equal to

Purchase Description (PD) Position Turner for Large Hulls Surface Support Division, B343 Shop Red River Army Depot (RRAD) Texarkana, TX 75507-5000 11 August 2026 1.0 Scope. This PD is to define the specifications necessary to award a contract for a 1 EA Position(Posi)-Turner: Model numbers � 10LS-250 or equal to, will be for the Directorate for Maintenance in the Welding Shop section, Bldg. 343 in support of the Bradley/MLRS fleet expansion effort. Contractor shall perform any/all site preparation needed for new equipment. Site preparation may include delivery of new equipment, offloading and positioning of new equipment, planning and designing, fabrication, and commissioning necessary to furnish one Posi-Turner to the Welding Shop. 2.0 Requirements. The following salient characteristics are the minimum requirements for any proposed items being offered: Capacity: 10,000 lbs. - Unit includes the "Leveler" that adjusts the center-of-gravity under the hook to balance the load with pushbutton control - Bail adjusts 6" +/- either side of center (bail = 4.3" x 7.5") - Maximum sling spacing: 251" - Minimum sling spacing: 14.25" - Heavy duty non-slip surface on drum - Heavy duty drive package - Power required: 460/3/60 (power to be supplied from crane) - Includes operator pendant with 20'-0 cord. - System to be used with a single crane/hoist hook - Estimated unit weight: 4765 lbs. - Estimated system height: 49" (base to hook) - Painted standard Caldwell yellow - Meets ASME B30.20, BTH-1 design standards; design category "B", service class "2". 3.0 Installation Schedule. The Posi-Turner shall be delivered, installed and operational at building 343, Red River Army Depot. RRAD works a four-day, ten-hour workweek, Mon-Thurs, 0630-1700. Working Friday is not guaranteed but will be taken into consideration. The contractor may request to work Friday with 48 hours prior notice to RRAD POC. RRAD will be closed on all Federal Holidays which are: New Year�s Day Martin Luther King...