How laboratory instruments are specified, and where single-source disputes start
Laboratory equipment is specified by performance rather than by description. A well-drafted tender states detection limits, precision, throughput, operating range and the methods the instrument must be capable of running, and lets any instrument that meets them compete. A poorly drafted one lists the features of a particular manufacturer's model, which is the most frequent ground of challenge in this category: a specification that only one product can satisfy is a single-source award wearing the clothes of a competition, and buyers are increasingly required to justify it in writing.
Acceptance is a defined process, not a delivery note. Instruments are normally required to pass installation, operational and performance qualification at the buyer's site before payment, witnessed and documented, with calibration traceable to recognised standards. Where the laboratory works to an accreditation standard, the supplier inherits obligations from it -- traceable calibration certificates, documented maintenance, and method validation support. Bidders who price delivery and not qualification lose the difference.
The commercial trap is the consumable and the service contract. Columns, reagents, cartridges, gases and proprietary software licences can exceed the instrument price within a few years, and preventive maintenance visits, engineer response times and guaranteed uptime are priced separately once the warranty ends. Buyers who evaluate on instrument price alone tend to return to the market for the same instrument's running costs shortly afterwards, which is why whole-life models and committed price lists for consumables are now common bid requirements.
This section describes how this category is bought generally, across the public buyers that publish it. The figures elsewhere on this page are measured for this market alone.
Who buys laboratory equipment in Czech Republic?
GlobalGov holds 1,979 laboratory equipment records from 267 distinct buying organisations in Czech Republic. The most frequent publishers are Univerzita Palackého v Olomouci (137 records); Vysoká škola báňská - Technická univerzita Ostrava (120 records); Ministerstvo obrany (83 records); Ústav organické chemie a biochemie AV ČR, v. v. i. (79 records); Všeobecná fakultní nemocnice v Praze (75 records); Masarykova univerzita (67 records). Between them the 6 largest account for 28% of everything published, so buying here is spread across many separate authorities.
| Buying organisation | Records | Share |
|---|---|---|
| Univerzita Palackého v Olomouci | 137 | 6.9% |
| Vysoká škola báňská - Technická univerzita Ostrava | 120 | 6.1% |
| Ministerstvo obrany | 83 | 4.2% |
| Ústav organické chemie a biochemie AV ČR, v. v. i. | 79 | 4.0% |
| Všeobecná fakultní nemocnice v Praze | 75 | 3.8% |
| Masarykova univerzita | 67 | 3.4% |
What are laboratory equipment contracts worth in Czech Republic?
1,556 of the 1,979 records publish a contract value. The median is $181,818 and the largest single published value is $39.6M. By size, 534 under $100k, 896 between $100k and $1M, 118 between $1M and $10M, 8 above $10M. The remaining 423 publish no value at all, so every figure here describes the priced subset only, and values are as stated by the buyer rather than as finally awarded.
| Contract size | Records | Share of priced |
|---|---|---|
| under $100k | 534 | 34% |
| between $100k and $1M | 896 | 58% |
| between $1M and $10M | 118 | 7.6% |
| above $10M | 8 | 0.5% |
How long do bidders get to respond to laboratory equipment tenders in Czech Republic?
Across the 936 Czech Republic laboratory equipment notices that publish both a publication date and a closing date, the median response window is 33 days. A quarter of them allowed 31 days or fewer and a quarter stayed open for more than 35. Short turnarounds are the exception rather than the rule here: only 2 (0.2%) closed within a fortnight of being published.
How often are laboratory equipment tenders published in Czech Republic?
Czech Republic publishes about 12 notices a month in this category, 143 in the last twelve months. That is 72% fewer than the 519 published in the twelve months before that. Over the last three years there were 1,131, spread across 61 separate months of activity since 10 March 2021. June is historically the busiest month. No new notice has been published in this category since 28 April 2026, 156 days ago, so treat the figures above as a record of the market rather than as this week's pipeline.
How does Czech Republic compare with other laboratory equipment markets?
Among the 42 countries where GlobalGov holds a comparable laboratory equipment market, Czech Republic ranks 6th by number of records. The largest is Poland (3,493 records against 1,979 here). Within Czech Republic itself, laboratory equipment is the 6th largest of the 61 procurement categories tracked here.
Where do the Czech Republic laboratory equipment records on this page come from?
These 1,979 records are collected from 1 official source: TED (1,979). GlobalGov is an independent aggregator and is not affiliated with any of them; each record links back to the notice on its issuing portal. The set is rebuilt nightly, and the counts on this page were taken on 2026-10-01.
Most recent Laboratory Equipment tenders in Czech Republic
None of these are open for bids now — they are the most recent records GlobalGov holds for this market, kept here so the shape of a typical laboratory equipment notice in Czech Republic is visible. Set an alert to be told when the next one opens.
Czechia – Optical instruments – Reprodukce termovizních zaměřovačů III. etapa
Czechia – Measuring instruments – Přenosné měřící přístroje
Czechia – Level-measuring equipment – H931 - Modernizace polní instrumentace na BUK HVB 1,2
Czechia – Laboratory, optical and precision equipments (excl. glasses) – Dynamický nákupní systém na laboratorní a měřicí techniku (III.)
Czechia – Optical instruments – Náhradní díly optické přístroje zahraniční výroby
Czechia – Laboratory, optical and precision equipments (excl. glasses) – Prostředky pro zkušebnictví munice akreditované laboratoře - nákup - 3. část
Czechia – Laboratory, optical and precision equipments (excl. glasses) – TBU - Dynamic purchasing system for laboratory instruments and measuring equipment
Czechia – Meteorological instruments – Rozvoj a výstavba meteo info systému METIS
Czechia – Optical instruments – Přístroje nočního vidění pro jednotky rezortu MO
Other procurement categories in Czech Republic
Medical EquipmentSoftware DevelopmentVehicles and FleetCivil ConstructionArchitecture and EngineeringRoads and Highways InfrastructureIct EquipmentOffice FurnitureManagement ConsultingVehicle MaintenanceWaste ManagementTelecommunicationsBuilding ConstructionAgricultural EquipmentFuel SupplyUniforms ClothingHospital ConstructionPharmaceuticalsBuilding MaterialsFinancial AdvisoryGround TransportFacilities and CleaningTraining and Capacity BuildingRenovation RehabilitationFood Aid and NutritionIT ConsultingMilitary LogisticsWeapons SystemsMaintenance & RepairOil Gas UpstreamResearch & DevelopmentMail CourierRoad & InfrastructureFreight and LogisticsCatering ServicesScientific ResearchEvent ManagementStaffing AugmentationCommunity DevelopmentDatabase ManagementElectrical InstallationPrinting PublishingEnergySite PreparationResearch and StudiesCommunications PrPower TransmissionSecurity ServicesNetwork InfrastructureCybersecurityTransportationSolar EnergyAudit and AccountingTraining & EducationHealthcare ServicesEnvironmental ServicesWarehousingLegal ServicesConsultingMonitoring Evaluation
Laboratory Equipment procurement in other markets
Never Miss a Czech Republic Government Contract
Finding Czech Republic tenders usually means a local portal, a local registration and someone who reads the language. Get an alert you can read when a new laboratory equipment opportunity is published there.
Start Free Trial